Hanna HI3842 Total Hardness (400-3000 mg/L) HR Test Kit

The HI3842 is a chemical test kit that measures total hardness as CaCO3 by titration with EDTA. The HI3842 is supplied complete with all of the reagents and equipment necessary to perform approximately 50 tests.

  • Pre-made reagents for ease of use
  • All reagents marked with expiration date and lot number for traceability
  • Manual titration performed with color indicator
Yuk, Bantu Share Ke Akun Social Media:


Hanna HI3842 Total Hardness (400-3000 mg/L) HR Test Kit

Hanna HI3842 Total Hardness (400-3000 mg/L) HR Test Kit

The HI3842 is a titration-based chemical test kit that determines the total hardness concentration within the 400 to 3000 mg/L (ppm) range. HI3842 is supplied with all of the necessary reagents and equipment to perform the analysis. The test kit contains enough reagents for perform approximately 50 tests.

Features at-a-glance

Complete setup

  • All required materials are included with the test kit, such as the sample beaker and reagent dropper bottle.

High resolution

  • Readings from 400 to 3000 mg/L are determined to 100 mg/L resolution.

Replacement reagents available

  • There is no need to buy a new kit when reagents are exhausted. The HI3842-050 can be ordered to replace the reagents supplied with the kit.

Significance of Use

Water hardness has traditionally been defined as the capacity of water to precipitate soap. The ionic species in the water causing the precipitation was later found to be primarily calcium and magnesium. Thus, water hardness is actually a quantitative measure of these ions in the water. It is also now known that certain other ion species, such as iron, zinc, and manganese contribute to the overall water hardness. The measure and subsequent control of water hardness is essential to prevent scaling and clogging in water pipes.


Hardness, Total Measurement Typetitration
Hardness, Total Range400 to 3000 mg/L CaCO₃
Hardness, Total Resolution100 mg/L
Hardness, Total MethodEDTA
Hardness, Total Number of Tests50
Weight120 g (4.2 oz.)
Dimensions115 x 105 x 80 mm (4.5 x 4.1 x 3.1″)
Ordering InformationHI3842 test kit comes with 30 mL hardness HR reagent and 50 mL calibrated vessel.

Informasi Tambahan

Berat1 kg


Belum ada ulasan.

Jadilah yang pertama memberikan ulasan “Hanna HI3842 Total Hardness (400-3000 mg/L) HR Test Kit”

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *